1016 North Lincoln Avenue - Pittsburgh, PA 15233 - Toll Free Phone: 1-800-366-1904



This July we'll be launching our NEW Projected Capacitive Sensor Constructions, including: 

GG2 (Double Sided ITO Glass)
OGS (One Glass Solution)


DawarTouch introduces its new Multi-Touch Projected Capacitive Touch technology.  Our PCT sensors are designed, manufactured, and supported in the USA at Dawar’s Pittsburgh, PA factory.  Constructed as an all glass solution, our touch screens provide extreme durability and superior optics.  We offer a standard product line from 4.3” - 24”W as well as custom solutions to meet your application requirements.  Dawar’s PCT is the perfect choice for your Medical, Instrumentation or Industrial application. 

Dawar’s Projected Capacitive Touch Screens consist of two ITO/Glass circuits and an Optically Clear Adhesive (OCA) that is used to optically bond the two circuits together.  A decorative lens can be added to the front surface of the sensor to allow for product designs similar to tablet PCs.  This lens is also optically bonded to the sensor layers to achieve high light transmission and low reflectance.  A touch event occurs when a finger or conductive stylus interferes with the electric field projected above the surface. This change in capacitance is detected by the controller which interprets the X and Y coordinates of the event.  Multiple fingers can be tracked simultaneously and the controller supports common multi-touch gestures.


Local Support Designed, manufactured and supported in the USA at Dawar's Pittsburgh facility
Multi-Touch Functionality Supports multi-touch gesturing - flick, pinch, expand, tap, click and rotate
Rugged Design All glass solution with ≥ 9H surface hardness
Enhanced Sensitivity Effortless input with finger, glove or conductive stylus
Accurate and Reliable No linearity calibration required
Custom Tuning System tuning to meet your custom application requirements
Cover Lens Multiple cover glass lens options available: Gorilla Glass, Dragon Trail, Chem Strengthened, Anti-Glare, Soda Lime, Heat Tempered, Heat Strengthened and more. 
Standard Product

4.3"W to 24"W - Standard Controller Board Solutions

4.3"W to 17" - Standard Chip on Flex Solutions

See standard sizes
Custom size? Place a request

Demo Kits are available for all standard sizes - Controller Board and Chip on Flex solutions.  Controller Board kits include the PCAP touch sensor, controller board and appropriate cables. Chip on Flex kits include the touch sensor only.

Please contact your local Dawar Representative if you are interested in purchasing a PCAP demo kit for evaluation.



Input Methods Bare finger, gloved hand or conductive stylus
Sensor Construction Glass/Glass sensor circuits with optional decorated glass front lens

 Controller Board


Chip on Flex

Resolution >4 lines/mm (NBS 1963A)
Light Transmission 90% +/- 3% (ASTMD1003)
Haze ≤ 3% +/- 2%
Clarity ≥ 97%
Operating Temperature & Humidity -30°C to +70°C, < 90% RH non-condensing
Storage Temperature & Humidity -40°C to +70°C, < 90% RH non-condensing
Sensor Thickness

4.3"W to 12.1" - 1.65mm

12.1"W to 17" - 2.45mm

18.5"W - 24"W - 2.70mm

Sealability: Can be sealed to meet NEMA 4 & 12, and IP 65 standards
Surface Hardness ≥ 9H